Bluedog Protective Coatings® FLOOR has been specially formulated to protect a wide variety of floor coverings, including timber flooring and concrete, as well as sealed marble, ceramic, porcelain, flagstone, quarry, terracotta, agglomerate, and terrazzo tiles.

Our coatings adhere to the flooring surface to protect floors from damage during building and renovation projects.

Because Bluedog flooring protection can be used on various surfaces, it helps prevent expensive renovation mishaps caused by building debris such as nails, screws, dropped tools, concrete splashes (during pouring), metal shavings, grout, and paint spills.

Flooring Recommendations:

• Floor Tiles (including sealed marble, ceramic, porcelain, flagstone, quarry, Mexican/terracotta, agglomerate, terrazzo): Grout joints must be cured before application.
• Timber Flooring – Polished durability class 1, 2, and 3. Durability class 4 may also be coated, but the wood must be fully sealed, lacquered, and cured before application. The floor sealer must be fully cured prior to applying Blue Dog Protective Coatings® FLOOR. This process may take several weeks, as the carrier solvents from the floorboard coating need to evaporate for proper curing.
• Concrete (internal) – Cured and un-pitted concrete (e.g., garage floors).
• Polished Concrete and Epoxy Coated Flooring Surfaces – Ensure the sealer is fully cured before applying Blue Dog Protective Coatings® FLOOR.
• Other Surfaces – We recommend testing a small amount of our product in a discrete area before beginning your full flooring project to ensure no residue remains from the coatings.

Bluedog Protective Coatings® FLOOR is NOT RECOMMENDED for unsealed or porous substrates.

Bluedog Protective Coatings simply roll on and peel off to provide up to 12 months of temporary protection. Water-based, environmentally friendly, Australian-made, and certified non-hazardous, our affordable protective coatings reduce the need for harsh chemicals, steel blades, and abrasive pads to remove renovation debris.